HowTo compile on Mac

From AMule Project FAQ
Revision as of 06:26, 4 March 2005 by Ken (Talk | contribs)

Jump to: navigation, search

The following steps will lead you to install aMule in your MacOS X box.

Alternatively, you can get recent ready-to-use binaries of aMule for MacOS X from the following thread on the forum: http://forum.amule.org/thread.php?threadid=5051


This HowTo is written to compile and install aMule 2.0.0-rc8. It will not work for older versions. Please note that you should always download the latest aMule version available.

NOTE: This document explains how to download files using curl. However, curl might not be installed on your system: either install it (you can use Fink to install it) or download the files with whatever application you want (maybe your web browser), but place them in the directory that's being used on each part of the guide, otherwise the commands that are shown here will not work.

Setting up the required environment

These steps are one-time-only steps necessary for the steps in the following sections to work properly.

  1. Xcode
    1. Install Xcode Tools from http://developer.apple.com/tools/download
    2. "Member Site"->"Log In"->"Download Software"->"Developer Tools"->"Download Xcode Tools last release">"Install"
  2. Fink
    1. Install (or verify installation if already installed) Fink from http://fink.sourceforge.net/download
  3. gettext
    1. Using Fink, install gettext. Read Fink's installation guide to learn how to install applications through Fink (the gettext package is gettext).
  4. Working directories
    1. Make amule dir in your home directory: mkdir ~/amule
    2. Make wxmac dir in your home directory: mkdir ~/wxmac

Obtaining wxMac sources

  1. Enter the wxmac directory: cd ~/wxmac
  2. Get the wxMac source tarball and place it in your ~/wxmac directory: curl -O http://dl.sourceforge.net/wxwindows/wxMac-2.5.4.tar.gz
  3. Extract it: tar -xzf wxMac-2.5.4.tar.gz
  4. Optional: You may delete the archive after extracting its contents: rm wxMac-2.5.4.tar.gz

Installing wxMac from sources

  1. Enter the directory containing the wxMac sources: cd ~/wxmac/wxMac-2.5.4
  2. Directory build should already be there. If not, create it with: mkdir build
  3. Now enter build directory: cd build
  4. Prepare the compilation: ../configure
  5. And compile: make
  6. Now install wxMac compilation: sudo make install
  7. Get back to your home directory, you're done: cd ~
  8. Optional: If everything went ok, you can safely remove the wxMac sources (not recommended, since you might want to compile it again someday): rm -r ~/wxmac

Compiling and installing aMule

  1. Enter the amule directory: cd ~/amule
  2. Get aMule's latest source code (aMule 2.0.0-rc8 sourcecode: http://download.berlios.de/amule/aMule-2.0.0rc8.tar.bz2) and place it in your ~/amule directory: curl -O http://download.berlios.de/amule/aMule-2.0.0rc8.tar.bz2
  3. Extract it: tar -xjf aMule-2.0.0rc8.tar.bz2
  4. Enter aMule's sources directory: cd aMule-2.0.0rc8
  5. Prepare the compilation (thanks to one_2_one and Babboia for his test&fix): ./configure --disable-systray --disable-gtk --with-wx-config=/usr/local/bin/wx-config
  6. And compile it: make
  7. Optional: You can reduce the size of aMule from 44MB to 3MB by doing the following (anyway, this will make the aMule binary lose debug info, so you'll be unable to report problems to the aMule Team to make aMule a better program; so, it is not recommended): strip src/amule
  8. Copy the amule binary to the app-Container directory: cp src/amule aMule.app/Contents/MacOS/ (NOTE: If the MacOS directory is missing in aMule.app, create it by typing mkdir aMule.app/Contents/MacOS before executing the previous command. Thanks to dan for the tip)
  9. And copy aMule.app directory to your Applications folder: cp -R aMule.app /Applications
  10. Get back to your home directory, you're done: cd ~
  11. If everything went OK, you can safely remove the downloaded packages:
    1. Remove aMule's sources package: rm ~/amule/aMule-2.0.0rc8.tar.bz2
    2. Optionally remove the extracted aMule sources (not recommended, since you might want to compile it again someday): rm -r ~/amule

Problems and solutions

  • If Fink reports something like: After unpacking 11.2GB will be freed, don't be afraid. Fink has evolved into a different way of managing packet's size and some old ("old": at least some months old) packages' sizes aren't handled correctly on the output. If this is your case, devide the number by 1024. So, what the above example really means is: After unpacking 11.2MB will be freed.
  • If you get an error like this: You cannot open the application "amule" because it may be damaged or incomplete, right click on amule, then click on Show Packages Contents, go to "Contents">"MacOS"> and double click on amule. Next time you start from aMule.app it will run fine. If you still get the same error, move aMule.app to the desktop and run it from there.

Older releases

In older releases (aMule 2.0.0-rc7 and earlier), the app container wasn't included with the sources. If you are compiling any of this older releases and do not whish to upgrade (remember it is strongly recommended to upgrade to the latest release), you can:

You must extract the app container in your amule directory: possible ~/amule To extract it: tar -xjf aMule-App-Container.tar.bz2

NOTE: If the app-Container failed to extract try running this command instead of the app-Container extraction step: mkdir -p aMule.app/Contents/MacOS

Once the installation is finished, you can safely remove the app-Container package: rm aMule-App-Container.tar.bz2

Retrieved from "http://wiki.amule.szerverem.hu/w/index.php?title=HowTo_compile_on_Mac&oldid=2688"